MH6.6 / MH8.6 MACHINE STRUCTURE 2-9 Switches / Keys (Fig. 2) Page 2 of 7 Carefully read personal and machine SAFETY INSTRUCTIONS (at the beginning of this manual) No.
Designation Function Symbol 10 Rocker switch Screen-wiper automatic wipe / wash function Activates the screen-washer pump and the wiper as long as the switch face without symbol is kept depressed T25 11 Rocker switch Screen-wiper Screen-wiper with multistage switch stage 0 = screen-wiper OFF stage I = intermittent wiping stage II = continuous wiping To deactivate the screen-wiper - depress the symbol face of the switch until the pilot lamp in the switch is off T26 12 Key Engine speed control Engine speed reduction in 7 steps (power stages see No. 13) T400 13 Key Engine speed control Engine speed increase up to max.
speed in 7 steps (7 power stages with fixed speed levels) Power stage 1 Power stage 2 Power stage 3 Power stage 4 Power stage 5 Power stage 5 Power stage 7 T401 14 Key Auto-Idle Activation / deactivation of automatic speed reduction. After activation, the speed of the diesel engine is automatically reduced to a lower speed during no-work phases lasting longer than 6 seconds. (see "Activating / deactivating the automatic speed reduc- tion") T433 15 Key Low-Idle Sets engine to idling speed. If Auto-Idle and Low-Idle are on at the same time, Low-Idle has higher priority.
T434 12-15 Keypad module C5.1 16 Key Gearshift LED1 on = 1st gear fixed (off-road travel) LED1 off = automatic gearshift (depending on travel speed and travel resistance, the machine shifts automatically into off-road gear (1st gear) or into 2nd gear) (see: "Shifting the travel gearbox") T430