Cummins — 4021389

Troubleshooting Symptoms Charts B3.9, B4.5, B5.9 Industrial Page TS-18 Section TS - Troubleshooting Symptoms Engine Acceleration or Response Poor Cause Correction Check for air in the fuel system. Tighten or replace the fuel connections, fuel lines, fuel tank standpipe and fuel filters as necessary. Vent air from the system. Refer to a Cummins® Authorized Repair Location. STEP 9 Air in the fuel system ............. OK Go To Next Step STEP 10 Air intake or exhaust leaks ............. Check for loose or damaged piping connections and missing pipe plugs. Check the turbocharger and exhaust manifold mounting. Refer to Procedure 010-058 (Air Intake Piping) in Section 3.

OK Go To Next Step Check the air intake system for restriction. Clean or replace the air filter and inlet piping as necessary. Refer to Procedure 010-059 (Air Cleaner Restriction) in Section 4. STEP 11 Air intake system restriction is above specification ............. OK Go To Next Step Operate the engine from a tank of high-quality fuel. Refer to Procedure 018-002 (Fuel Recommendations and Specifications) in Section V. STEP 12 Fuel grade is not correct for the application or the ............. fuel quality is poor OK Go To Next Step STEP 13 Fuel filter is plugged ............. Measure the fuel pressure before and after the fuel filter.

Refer to Procedure 006-015 (Fuel Filter - Spin-on) or Procedure 006-014 (Fuel Filter - Canister Type) in Section 5. OK Go To Next Step STEP 14 Fuel supply is not adequate ............. Check the flow through the filter to locate the source of the restriction. Refer to a Cummins® Authorized Repair Location. OK Go To Next Step STEP 15 Fuel lift pump is malfunctioning ............. Check the fuel lift pump for correct operation. Check the pump output pressure. Replace the fuel lift pump if necessary. Refer to a Cummins® Authorized Repair Location. OK Go To Next Step STEP 16 Contact a Cummins® Authorized Repair Facility