Cummins — 4021389

Troubleshooting Symptoms Charts B3.9, B4.5, B5.9 Industrial Page TS-22 Section TS - Troubleshooting Symptoms Engine Difficult to Start or Will Not Start (No Exhaust Smoke) Cause Correction STEP 1 Starting procedure is not correct ............. Verify the correct starting procedure. Refer to Procedure 101-014 (Normal Starting Procedure) in Section 1. OK Go To Next Step STEP 2 Fuel level is low in the tank ............. Fill the supply tank. Refer to the OEM service manual. OK Go To Next Step STEP 3 Fuel grade is not correct for the application or the Operate the engine from a tank of high-quality fuel. Refer to Procedure 018-002 (Fuel Recommendations and Specifications) in Section V.

fuel quality is poor ............. OK Go To Next Step Check for loose wires and verify that the fuel shutoff valve is functioning. Refer to the OEM service manual. STEP 4 Fuel shutoff is malfunctioning ............. OK Go To Next Step STEP 5 OEM engine protection system is malfunctioning ............. Isolate the OEM engine protection system. Follow the OEM service manuals to check for a malfunction. OK Go To Next Step STEP 6 Battery voltage is low ............. Check the batteries and the unswitched battery supply circuit. Refer to the OEM service manual. OK Go To Next Step STEP 7 Keyswitch circuit is malfunctioning ............. Check the vehicle, equipment, or vessel keyswitch circuit.

Refer to a Cummins® Authorized Repair Location. OK Go To Next Step STEP 8 Air in the fuel system ............. Check for air in the fuel system. Tighten or replace the fuel connections, fuel lines, fuel tank standpipe and fuel filters as necessary. Vent air from the system. Refer to a Cummins® Authorized Repair Location. OK Go To Next Step