Troubleshooting Symptoms Charts B3.9, B4.5, B5.9 Industrial Page TS-26 Section TS - Troubleshooting Symptoms Engine Noise Excessive — Combustion Knocks Cause Correction Check the winterfront, shutters, and under-the- hood air. Use under-the-hood intake air in cold weather. Refer to Operations of Diesel Engines in Cold Weather, Bulletin 3379009, and Procedure 101-004 (Cold Weather Starting) in Section 1. STEP 1 Engine is operating at low ambient temperature ............. OK Go To Next Step STEP 2 Ether starting aid is malfunctioning ............. Repair or replace the ether starting aids. Refer to the manufacturer's instructions.
OK Go To Next Step STEP 3 Fuel grade is not correct for the application or the Operate the engine from a tank of high-quality fuel. Refer to Procedure 018-002 (Fuel Recommendations and Specifications) in Section V. fuel quality is poor ............. OK Go To Next Step Check for air in the fuel system. Tighten or replace the fuel connections, fuel lines, fuel tank standpipe and fuel filters as necessary. Vent air from the system. Refer to a Cummins® Authorized Repair Location. STEP 4 Air in the fuel system ............. OK Go To Next Step STEP 5 Coolant temperature is below specification ............. Refer to the Coolant Temperature Below Normal symptom tree.
OK Go To Next Step STEP 6 Contact a Cummins® Authorized Repair Facility