Troubleshooting Symptoms Charts B3.9, B4.5, B5.9 Industrial Page TS-28 Section TS - Troubleshooting Symptoms Engine Power Output Low Cause Correction STEP 9 Fuel leak ............. Check the fuel lines, fuel connections, and fuel filters for leaks. Check the fuel lines to the supply tanks. Refer to the OEM service manual. OK Go To Next Step Check for air in the fuel system. Tighten or replace the fuel connections, fuel lines, fuel tank standpipe and fuel filters as necessary. Vent air from the system. Refer to a Cummins® Authorized Repair Location. STEP 10 Air in the fuel system ............. OK Go To Next Step STEP 11 Fuel supply is not adequate .............
Check the flow through the filter to locate the source of the restriction. Refer to the OEM service manual. OK Go To Next Step STEP 12 Fuel return restriction excessive ............. Inspect the fuel return lines for restrictions. Refer to the OEM service manual. OK Go To Next Step STEP 13 Fuel filter is plugged ............. Measure the fuel pressure before and after the fuel filter. Refer to a Cummins® Authorized Repair Location. OK Go To Next Step STEP 14 Fuel pump overflow valve is malfunctioning ............. Check the overflow valve. Replace if necessary. Refer to a Cummins® Authorized Repair Location. OK Go To Next Step Check the fuel lift pump for correct operation.
Check the pump output pressure. Replace the fuel lift pump if necessary. Refer to a Cummins® Authorized Repair Location. STEP 15 Fuel lift pump is malfunctioning ............. OK Go To Next Step STEP 16 Vehicle parasitics are excessive ............. Check the vehicle brakes for dragging, transmission malfunction, cooling fan operation cycle time, and engine-driven units. Refer to the OEM service manual. OK Go To Next Step