Troubleshooting Symptoms Charts B3.9, B4.5, B5.9 Industrial Page TS-44 Section TS - Troubleshooting Symptoms Exhaust Smoke Excessive Under Load Cause Correction STEP 1 Engine is being lugged down ............. Use lower gear. OK Go To Next Step Check for air in the fuel system. Tighten or replace the fuel connections, fuel lines, fuel tank standpipe and fuel filters as necessary. Vent air from the system. Refer to Section 5. STEP 2 Air in the fuel system ............. OK Go To Next Step STEP 3 Air filter is restricted ............. Check the air filter for restrictions. Refer to Section 4. OK Go To Next Step STEP 4 Intake or exhaust leak .............
Check intake and exhaust systems for loose or damaged piping connections and/or missing pipe plugs. Check turbocharger and exhaust manifold mounting. Refer to Section 4. OK Go To Next Step Allow the engine to warm to operating temperature. If the engine will not reach operating temperature, refer to the Coolant Temperature Below Normal symptom tree. STEP 5 Engine is cold ............. OK Go To Next Step Check the AFC for leaks. Repair any leaks found, if necessary. Check and clean AFC tubing and fittings for obstructions. Refer to the OEM service manual or a Cummins Authorized Repair Facility. STEP 6 Air-fuel (AFC) control is leaking or obstructed .............
OK Go To Next Step STEP 7 Contact a Cummins® Authorized Repair Facility