Cummins — 4021389

Troubleshooting Symptoms Charts B3.9, B4.5, B5.9 Industrial Page TS-52 Section TS - Troubleshooting Symptoms Lubricating Oil Consumption Excessive Cause Correction STEP 1 Crankcase ventilation system is plugged ............. Check and clean the crankcase breather and vent tube. Refer to Section 3 . OK Go To Next Step STEP 2 Lubricating oil does not meet specifications for ............. Change the oil and filters. Refer to Section 5 . Use the oil recommended in Section V. operating conditions OK Go To Next Step STEP 3 Lubricating oil drain interval is excessive ............. Verify the correct lubricating oil drain interval. Refer to Section 2 .

OK Go To Next Step Inspect the engine for external oil leaks. Tighten the capscrews, pipe plugs, and fittings. Replace gaskets, if necessary. Refer to Section V for specifications. STEP 4 Lubricating oil leak (external) ............. OK Go To Next Step STEP 5 Verify the oil consumption rate ............. Check the amount of oil added versus the hours of operation. OK Go To Next Step STEP 6 Air compressor is pumping lubricating oil into the ............. Check the air lines for carbon buildup and lubricating oil. Refer to a Cummins Authorized Repair Facility. air system OK Go To Next Step STEP 7 Contact a Cummins® Authorized Repair Facility