Fuel System B3.9, B4.5, B5.9 Industrial Page V-2 Section V - Maintenance Specifications Fuel System Specifications For performance and fuel rate values, refer to the Engine Data Sheet or the fuel injection pump for the particular model involved.
Distributor-Type and In-Line-Type Fuel Injection Pumps Engine Idle Speed...............................................................................................................................700 to 1000 rpm Maximum Fuel Inlet Restriction to Lift Pump.......................................................................................14 kPa [4 in Hg] Maximum Allowable Return Line Restriction.....................................................................................69 kPa [20 in Hg] Maximum Allowable Return Line Restriction - 4B/BT and 6B/6BT Engines.................................259 kPa [10.2 in Hg] Maximum Allowable Return Line Restriction - 4BTA Engine........................................................517 kPa [20.4 in Hg] Maximum Fuel Pump Restriction 4B and 6B Engines (with clean filter)........................................63.5 kPa [2.5 in Hg] Maximum Fuel Pump Restriction 4B and 6B Engines (with dirty filter)..............................................100 kPa [4 in Hg] Fuel Pressure Range at Fuel Filter Outlet (engine cranking)..................................................21 to 28 kPa [3 to 4 psi] Fuel Pressure Range at Fuel Filter Inlet (engine running at idle)............................................34 to 48 kPa [5 to 7 psi] Maximum Pressure Drop across Fuel Filter............................................................................................34 kPa [5 psi] Fuel Drain Line Maximum Restriction....................................................................................................70 kPa [10 psi] Fuel Transfer Pump Minimum Output Pressure (low flow)................................................................37.9 kPa [5.5 psi] Fuel Transfer Pump Minimum Output Pressure (high flow).................................................................172 kPa [25 psi] Minimum Fuel Injection Pump Gallery Pressure (low flow fuel transfer pump)..................................82.7 kPa [12 psi] Minimum Fuel Injection Pump Gallery Pressure (high flow fuel transfer pump)..................................140 kPa [20 psi] Fuel Inlet Maximum Temperature.............................................................................................................70°C [158°F] Engine Minimum Cranking Speed.........................................................................................................................110 rpm