B3.9, B4.5, B5.9 Industrial Lubricating Oil Recommendations and Specifications Section V - Maintenance Specifications Page V-11 For further details and discussion of engine lubricating oils for Cummins engines, refer to Cummins Engine Oil Recommendations, Bulletin 3810340. The API service symbols are shown in the accompanying illustration. The upper half of the symbols display the appropriate oil categories. The lower half can contain words to describe oil energy- conserving features. The center section identifies the SAE oil viscosity grade. As the engine oil becomes contaminated, essential oil additives are depleted.
Lubricating oils protect the engine as long as these additives are functioning properly. Progressive contamination of the oil between oil and filter change intervals is normal. The amount of contamination will vary, depending on the operation of the engine, kilometers or miles on the oil, fuel consumed, and new oil added. Extending oil and filter change intervals beyond the recommendations will decrease engine life due to factors such as corrosion, deposits, and wear. Reference the oil drain chart in this section to determine which oil drain interval to use for your application.