Cummins — 4021389

B3.9, B4.5, B5.9 Industrial Maintenance Schedule Section 2 - Maintenance Guidelines Page 2-3 Maintenance Schedule General Information For your convenience, listed below are the section numbers that contain specific instructions for performing the maintenance checks. Perform maintenance at whichever interval occurs first. At each scheduled maintenance interval, perform all previous maintenance checks that are due for scheduled maintenance.

Maintenance Procedures at Daily Interval (4) .................................................................................................Section 3 Air Intake Piping - Inspect Air Tank and Reservoirs - Drain Cooling Fan - Check Crankcase Breather Tube - Inspect Drive Belts - Check Engine Coolant Level - Check Engine Lubricating Oil Level - Check Fuel-Water Separator - Drain Maintenance Procedures at 250 Hours or 3 Months (1, 4) ..............................................................................Section 4 Air Cleaner Restriction - Check Air Compressor Mounting Hardware - Check Charge Air Cooler - Check Charge Air Piping - Check Fuel Injection Pump Mounting Hardware - Check Lubricating Oil and Filters - Change Radiator Hoses - Check Radiator Pressure Cap - Check Maintenance Procedures at 500 Hours or 6 Months (2, 3, 4) ...........................................................................Section 5 Engine Coolant - Check Fuel Filter, Canister Type - Change Fuel Filter, Spin-On Type - Change Lubricating Oil and Filters - Change Maintenance Procedures at 1000 Hours or 1 Year (4) ....................................................................................Section 6 Cooling Fan Belt Tensioner - Check Fan Hub, Belt-Driven - Check Overhead Set - Adjust Maintenance Procedures at 2000 Hours or 2 Years (3, 4) ...............................................................................Section 7 Air Compressor Discharge Line - Check Cooling System - Flush 5 Vibration Damper, Rubber - Check Vibration Damper, Viscous - Check 1 The lubricating oil and lubricating oil filter interval can be adjusted based on application, fuel consumption, gross vehicle weight, and idle time.

For engines whose aspiration is jacket water-cooled, turbocharged only , or natural, refer to Table 1 in the Oil Drain Intervals section. 2 The lubricating oil and lubricating oil filter interval can be adjusted based on application, fuel consumption, gross vehicle weight, and idle time. For engines whose aspiration is charge air cooled, refer to Table 2 in the Oil Drain Intervals section.