B3.9, B4.5, B5.9 Industrial Closed Crankcase Ventilation Hoses Section 4 - Maintenance Procedures at 250 Hours or 3 Months Page 4-3 Charge-Air Piping Maintenance Check Inspect the charge-air piping and hoses for leaks, holes, cracks, or loose connections. Tighten the hose clamps if necessary. Refer to the vehicle or equipment manufacturer's specifications for the correct torque value. Fuel Pump Maintenance Check Inspect the fuel injection pump mounting nuts, including the tail support bracket, for loose or damaged hardware. Radiator Hoses Maintenance Check Check all hoses for cracks, cuts, or collapsing. NOTE:
The silicone engine coolant hose will exhibit swelling due to the elasticity of the hose. If damage is found, replace damaged hoses. Contact your local Cummins Authorized Repair Location. Closed Crankcase Ventilation Hoses Maintenance Check Inspect the closed-crankcase ventilation piping and hoses for leaks, holes, cracks, or loose connections. Tighten the hose clamps, if necessary to proper torque. Refer to Section V for torque specification. The illustration shown is one of two options available for the closed-crankcase ventilation system.