Komatsu — 4.8.5 FUEL SYSTEM WATER SEPARATOR - DRAIN WATER

MAINTENANCE 4.8 EVERY 10 OPERATING HOURS OR DAILY 4.8.5 FUEL SYSTEM WATER SEPARATOR - DRAIN WATER Legend for illustration Z 23062 (1) Fuel tank (2) Fuel shut-off solenoid valve. This solenoid valve cuts- off fuel supply to the engine when the stop switch on the instrument panel is actuated. (3) Water separator filter (4) Engine fuel filters (5) Return fuel from engine (6) Fuel inlet to fuel cooler segment of the radiator (7) Fuel outlet from fuel cooler segment of the radiator (8) Return fuel to tank (9) Fuel cooler segment of the radiator (10) Counterweight Draining Water Frequency of water draining is determined by the contamination of the fuel.

Inspect or drain the collection bowl of water daily or as necessary. The collection bowl must be drained before contami- nants reach the top of the turbine. Refer to separate Instruction booklet -Fuel Filter/Water Separator- filed in volume 2 binder for draining procedure. Filter Element Replacement Frequency of element replacement is determined by the contami- nation of the fuel. Replace the elements after every 500 operating hours, if power loss is noticed or annually, which ever comes first. Refer to separate Instruction booklet -Fuel Filter/Water Separator- filed in volume 2 binder for replacement procedure. 281