INTRODUCTION 1.4 DELIVERY OF THE SHOVEL 1.4 DELIVERY OF THE SHOVEL The Shovel is being delivered disassembled into its main compo- nents. For assembling the Shovel refer to the ”General Assembly Procedure Manual” in Volume 2 Service Literature Binder. Improper assembling of the Shovel can cause serious accidents with personal injury or death. Personnel entrusted with work on the machine must have read the Assembly Manual, the Operation- and Maintenance Manual and in particular the section on safety before beginning work. Reading the instructions after work has begun is too late.
If there are any ques- tions concerning safe assembling procedure, contact your local Komatsu Service Organization. Prior to first operation, inspect the Shovel thoroughly with the Ser- vice Engineer responsible for the erection of the machine. Check all fluid levels according to the Lubrication and Maintenance Schedule. Damages and defects caused by incorrect operation and mainte- nance are not covered by the manufacturers guarantee. NOTICE If the Shovel is equipped with a fire suppression system, make sure that the system is ready for operation. SPARE PARTS For your spare part orders refer to the Parts Catalogue.
In order to keep your Shovel in first-class operating condition use only genuine spare and wear parts. The use of any part other than the genuine part releases the KOMATSU MINING GERMANY GmbH from any guarantee. SERVICE For all questions related to your Shovel please contact your local Service Center. In all your written or phoned inquiries please indicate the model and serial number of your Shovel. 7 WARNING WARNING