Komatsu — 3.4.2 OPERATOR INFORMATION SCREEN NO. 1.1

3.4 VEHICLE HEALTH MONITORING SYSTEM VHMS – HEALTH MONITOR OPERATION 3.4 VEHICLE HEALTH MONITORING SYSTEM VHMS – HEALTH MONITOR 3.4.1 INITIALIZATION SCREEN NO. 0.0 The Monitor of the V ehicle H ealth M onitoring S ystem illust. (Z 21569) displays the condition of the machine, the mainte- nance status, and messages for the operator and service man, and is also used to input the necessary data. The surface of the monitor screen is equipped with touch switches to switch the screen and input the data. Sequence of Displays When the main key switch is turned ON, the initialization screen (No. 0.0) is displayed for approx. 5 seconds. This screen shows also the selected system language.

REMARK If the ambient temperature of the monitor is below -10°C, the screen remains dark until the internal heater has warmed up the screen to operating temperature. If the ambient temperatures goes above +60°C the screen becomes dark (back light is turned off to protect the screen). When the temperature returns to operating range, the display will appear again, so carry out operations according to the machine monitor. A reset button for the monitor is located on the Opera- tor’s console, see illustration (Z 25447) on page 93. REMARK The system offers two languages, for example ENGLISH – GERMAN, according to Customer request.

Changing of the present language can be carried out in the main group SET- TINGS of the SERVICE MENU. Refer to the SERVICE MANUAL VHMS-SYSTEM for more information. 3.4.2 OPERATOR INFORMATION SCREEN NO. 1.1 The second display (No. 1.1), illust. (Z 21570) is of general infor- mation for the operator. Press the touch switch ”NEXT” on the screen surface for display of the standard monitor 1, (No. 1.2). REMARK The colored Graphic Flow Chart (Z 21568) attached in the pocket of the front cover gives an overall view of the menu struc- ture, the menu availability for the operator and for the service staff, as well as the automatic functions of the system.

The num- bering (0.0, 1.1, 1.2 and so on) of the monitors in this chart is also used on all monitor pictures in this section. Use this chart for menu control in connection with the description on the following pages. 96