116 RT115 Tier 2 - REEL WINDER ATTACHMENT OPERATION Rotate lever arm (3) back and attach cylinder rod to top cylinder mounting hole (2). 7. Move reel winder selector switch to activate reel winder control functions. 12. Move reel winder selector switch to activate backfill blade controls. For 5 ft to 7 ft (152 to 213 cm ) diameter reels: 8. Lower reel winder arm until tire meets reel flange. 10. When finished winding, raise reel winder arm. 1. Drive to beginning of planned plow path. While supporting lever arm, remove bolt (1) that attaches hydraulic lift cylinder to lever arm. Rotate lever arm (3) back and attach cylinder rod to bottom cylinder mounting hole (1).
For 2 ft to 5 ft (61 to 152 cm ) diameter reels: 4. Lower plow attachment. 6. Attach service line to reel. p 4. Remove lever arm (3). 2. Engage parking brake. 3. Lower backfill blade. OPERATION 5. Adjust throttle. 9. Wind service line. 11. Adjust throttle.