124 RT115 Tier 2 - SAW ATTACHMENT SETUP 3. Drive to starting point. Move in line with planned trench. See TRACTOR for operating procedures. 4. Engage parking brake and verify parking brake indicator is on. 10. Lower stabilizers until distance from bottom of skid shoe to bottom of saw bits equals desired trench depth. 11. Check that saw is in line with planned trench and that tires are pointing straight ahead. 2. Start tractor. See TRACTOR start-up procedures. 5. Move gearbox control to 1 (low). 7. Swivel seat to the work position. 9. Lower saw to just above ground. 1. Fasten and adjust seat belt. 6. Tilt steering wheel column up. p 8. Engage axle lock. Normal Use