APPROVED COOLANT This unit was filled with John Deere Cool-Gard coolant before shipment from factory. Add only John Deere Cool-Gard (p/n 255- 006) or any fully-formulated, ethylene glycol based, low-silicate, heavy-duty diesel engine coolant meeting ASTM specification D5345 (prediluted) or D4985 (concentrate) and containing supplemental coolant additives (SCAs) meeting John Deere specification JDM H24A2. NOTICE: Do not mix heavy-duty diesel engine coolant and automotive-type coolant. This will lead coolant breakdown and engine damage. Incorrect procedures could result in death, injury, or property damage. Learn to use equipment correctly. NOTICE:
Do not use water or high-silicate automotive-type coolant. This will lead to engine damage or premature engine failure. Before servicing equipment, lower unstowed attachments to ground 154 RT115 Tier 2 - SERVICE Unless otherwise instructed, all service should be performed with engine off. Refer to engine manufacturer’s manual for engine maintenance instructions. APPROVED COOLANT p NOTICES: