Ditch Witch RT115 Tier 2 — Cruise Control Operation

94 RT115 Tier 2 - TRENCHER ATTACHMENT OPERATION 9. When desired depth is reached, ensure throttle is fully open. 11. Slowly adjust cruise control rpm control to match digging conditions. In harder digging conditions, higher cruise control rpm setting may improve digging performance. In easier digging conditions, lower cruise control rpm setting may increase ground drive speed. See "Operating Tips." 12. When finished digging, move ground drive control to neutral. EMERGENCY SHUTDOWN - Turn ignition switch to STOP. 8. Following procedures in "Operation," begin trenching to desired depth. 10. Slowly move ground drive control to full forward position. 14.

Allow chain to dig itself free before stopping attachment. 6. Move cruise control RPM control to arrow at center. 4. Ensure cruise control selector is in MANUAL. 5. Ensure that all controls are set as desired. 13. Move cruise control selector to MANUAL. 1. Ensure ground drive control is in neutral. 2. Ensure hydraulic motor switch is in low. 7. Move cruise control selector to AUTO. 3. Ensure gearbox control is in 1 (low). Cruise Control Operation p