Contents Page Page Operating Boom—EH Controls .......................2-2-14 Operating Bucket—EH Controls......................2-2-16 Operating Auxiliary Hydraulics ........................2-2-18 Hydraulic System Pressure Release—EH Controls................................2-2-21 Hydraulic System Pressure Release—Manual Controls .........................2-2-21 Using Attachment Mounting System—Quik-Tatch™................................2-2-23 Self Leveling Hydraulics—If Equipped ............2-2-25 High Flow Hydraulics—If Equipped.................2-2-25 Creep Mode Operation—If Equipped ..............2-2-26 Auto Idle Operation..........................................2-2-27 Boom and Bucket Speed Settings—If Equipped.....................................................2-2-27 Loading Machine On a Trailer .........................2-2-28 Fluid Analysis Program Test Kits and 3-Way Coolant Test Kit..................................3-2-6 Service Intervals................................................3-2-7 Required Parts...................................................3-2-8 Maintenance—As Required Inspect and Clean Cooling Package .................3-3-1 Check Tire Pressure..........................................3-3-2 Check Wheel Lug Nut Torque............................3-3-3 Check and Clean Cab Fresh Air and Recirculation Air Filters—If Equipped ...........3-3-4 Inspect and Clean Fuel Tank Vent Tube............3-3-4 Check Coolant...................................................3-3-5 Lubricate Steering Centering Mechanism .........3-3-6 Maintenance—Every 10 Hours or Daily Check Engine Oil Level .....................................3-4-1 Check Hydraulic Reservoir Oil Level.................3-4-1 Check Coolant Level .........................................3-4-2 Check and Drain Water Separator Fuel Filter ...3-4-2 Check and Drain Auxiliary Fuel Filter and Water Separator—If Equipped ...............3-4-3 Maintenance—Machine Diesel Fuel.........................................................3-1-1 Lubricity of Diesel Fuel ......................................3-1-1 Handling and Storing Diesel Fuel......................3-1-2 Biodiesel Fuel....................................................3-1-3 Testing Diesel Fuel ............................................3-1-4 Minimizing the Effect of Cold Weather on Diesel Engines .........................................3-1-5 Operating in Cold Temperature Climates ..........3-1-6 Alternative and Synthetic Lubricants .................3-1-6 Diesel Engine Break-In Oil ................................3-1-6 Diesel Engine Oil—326D...................................3-1-7 Engine Oil and Filter Service Intervals—326D ..3-1-8 Diesel Engine Oil—328D and 332D ..................3-1-9 Engine Oil and Filter Service Intervals—328D and 332D..........................3-1-10 Light Duty Diesel Engine Coolant (for diesel engines without wet sleeve cylinder liners).............................................3-1-11 Drain Intervals for Diesel Engine Coolant........3-1-11 John Deere COOL-GARD™II Coolant Extender......................................................3-1-12 Supplemental Coolant Additives......................3-1-12 Operating in Warm Temperature Climates ......3-1-13 Additional Information About Diesel Engine Coolants and John Deere COOL-GARD™II Coolant Extender...........3-1-14 Testing Diesel Engine Coolant.........................3-1-15 Hydraulic and Hydrostatic Oil ..........................3-1-15 Chain Case Oil ................................................3-1-16 Grease.............................................................3-1-16 Maintenance—Every 50 Hours Lubricate Boom Linkage, Cylinder Pivot Points, and Quik-Tatch™Linkage........3-5-1 Maintenance—Initial Service - 250 Hours Change Engine Oil and Replace Filter ..............3-6-1 Maintenance—Every 250 Hours Take Engine Oil Sample ....................................3-7-1 Maintenance—Every 500 Hours Change Engine Oil and Replace Filter ..............3-8-1 Replace Fuel Filter and Water Separator ..........3-8-2 Replace Auxiliary Fuel Filter and Water Separator—If Equipped.................................3-8-3 Replace In-Line Fuel Filter ................................3-8-3 Replace Primary Engine Air Filter .....................3-8-4 Replace Hydraulic Oil Reservoir Breather.........3-8-5 Replace Hydraulic Oil Filter...............................3-8-5 Lubricate Steering Linkage—If Equipped..........3-8-6 Drain Fuel Tank Sump.......................................3-8-6 Check Chain Case Oil Level..............................3-8-7 Take Fluid Samples ...........................................3-8-7 Maintenance—Every 1000 Hours Check Coolant...................................................3-9-1 Replace Secondary Engine Air Filter.................3-9-2 Change Hydraulic Reservoir Oil ........................3-9-4 Change Chain Case Oil.....................................3-9-5 Maintenance—Periodic Maintenance Service Machine at Specified Intervals..............3-2-1 Fuel Tank...........................................................3-2-1 Raising and Blocking Machine ..........................3-2-2 Raising Operator's Station.................................3-2-3 Opening and Closing Engine Cover ..................3-2-4 Engine Side Panels—Remove and Install.........3-2-4 Footwell Removal..............................................3-2-6 Maintenance—Every 6000 Hours Drain Cooling System......................................3-10-1 Continued on next page ii 071713 PN=2