John Deere 326D, 328D, 332D — Key Switch ON, Engine OFF Checks

Miscellaneous—Operational Checkout 1 EMU Circuits Check Turn key switch ON. LOOK: Do gauges move to the far right position, then move to the center position, and then display the machine status? YES: Go to next check. LOOK: Do switches on control panel illuminate? NO: Check key switch unswitched power 7.5 amp fuse (F1). LISTEN: Does EMU alarm sound? NO: Check monitor unswitched power 10 amp fuse (F2). Close cab door—if equipped. NO: Check switched power 10 amp fuse (F15). LOOK: Does the cab door indicator go off? NO: See your authorized dealer. 2 Horn Circuit Check (If Equipped) Press the horn switch. YES: Go to next check. OUT4001,000051E -19-04DEC09-6/28 LISTEN: Does horn sound? NO:

Check key switch unswitched power 7.5 amp fuse (F1). NO: Check horn 10 amp fuse (F16). NO: See your authorized dealer. 3 Lights Circuit Check Push light switch to middle position. YES: Go to next step in this check. OUT4001,000051E -19-04DEC09-7/28 LOOK: Do front work lights and tail lights turn on? NO: Check lights 20 amp fuse (F6). NO: Check key switch unswitched power 7.5 amp fuse (F1). NO: See your authorized dealer. Push light switch to upper position. YES: Go to next step in this check. LOOK: Do front work lights and tail lights stay on and rear work light turn on? NO: See your authorized dealer. If equipped, push dual flasher switch to the upper position. YES: Go to next check. LOOK:

Do the dual flashers turn on? NO: See your authorized dealer. Continued on next page OUT4001,000051E -19-04DEC09-8/28 4-2-2 071713 PN=147