Safety—Operating Precautions Use Steps and Handholds Correctly Prevent falls by facing the machine when getting on and off. Maintain 3-point contact with steps and handrails. Never use machine controls as handholds. T133468 —UN—15APR13 Use extra care when mud, snow, or moisture present slippery conditions. Keep steps clean and free of grease or oil. Never jump when exiting machine. Never mount or dismount a moving machine. TX03679,00016F2 -19-24APR13-1/1 Start Only From Operator's Seat Avoid unexpected machine movement. Start engine only while sitting in operator's seat. Ensure all controls and working tools are in proper position for a parked machine.
T133715 —UN—15APR13 Never attempt to start engine from the ground. Do not attempt to start engine by shorting across the starter solenoid terminals. TX03679,0001799 -19-22APR10-1/1 Use and Maintain Seat Belt Use seat belt when operating machine . Remember to fasten seat belt when loading and unloading from trucks and during other uses. T133716 —19—17APR13 Examine seat belt frequently. Be sure webbing is not cut or torn. Replace seat belt immediately if any part is damaged or does not function properly. The complete seat belt assembly should be replaced every 3 years, regardless of appearance.
TX03679,00016DD -19-03NOV08-1/1 Prevent Unintended Machine Movement Be careful not to accidentally actuate controls. Follow these steps during work interruptions, before allowing coworkers to approach the machine, before standing up, leaving the operator's seat, or exiting the machine: Lower equipment to the ground Press park brake switch (1) to position P to engage park brake Stop the engine Raise interlocking seat bar TX1064905A —UN—23SEP09 1— Park Brake Switch OUT4001,0000467 -19-28SEP09-1/1 1-3-1 071713 PN=22