John Deere 326D, 328D, 332D — Boom Release

Operation—Operating the Machine Boom Release CAUTION: Prevent possible injury from unexpected boom movement. Never exit machine with boom raised unless boom is resting on boom lock. TX1067098A —UN—30OCT09 Boom release mechanism is to be used when boom is in a partially raised position and engine is stopped and will not start. Manual Controls 1. Close cab door, if equipped. 2. Fasten seat belt. Boom Release Cover 3. Lower interlocking seat bar. 4. Remove wing screw (1) from cover in lower left corner of cab. Remove cover. 5. Turn key switch to RUN position. Do not start engine. TX1067099A —UN—30OCT09 6. Cycle park brake to middle position. 7. Pull up handle (2) and hold. 8.

Actuate boom function: For Hand and Foot Machine—press down on front of left pedal. For Hands Only Machine—pivot left control lever towards operator. Boom Release Handle 1— Wing Screw 2— Handle 9. Lower boom. EH Controls 5. Cycle park brake to middle position. 1. Close cab door, if equipped. 6. Actuate boom function by moving right joystick forward. 2. Fasten seat belt. 7. Lower boom. 3. Lower interlocking seat bar. If boom does not lower, see your authorized dealer. 4. Turn key switch to RUN position. Do not start engine. OUT4001,0000529 -19-14JAN11-1/1 2-2-7 071713 PN=59