John Deere 326D, 328D, 332D — Hydraulic System Pressure Release—Manual Controls

Operation—Operating the Machine Hydraulic System Pressure Release—EH Controls 5. Raise and then lower interlocking seat bar. CAUTION: To prevent crushing injury, only perform hydraulic system pressure release with boom down or boom up with boom lock engaged. To lower boom manually, see Boom Release in this section. CAUTION: To avoid injury from escaping fluid under pressure, stop engine and relieve the pressure in the system before disconnecting or connecting hydraulic or other lines. Tighten all connections before applying pressure. Use this procedure to relieve trapped hydraulic system pressure before performing hydraulic system repairs or tests. 6.

Cycle both the boom and bucket functions. 7. Stop cycling functions once pressure has been released. 1. Sit in seat. Close cab door if equipped. 8. Cycle auxiliary hydraulic functions. 2. Lower interlocking seat bar. 3. Turn key to run position. Do not start engine. 9. Stop cycling auxiliary hydraulic functions once pressure has been released. 4. Switch park brake switch to middle position to engage hydraulic functions. 10. Engage park brake and turn key switch to off. KH31969,0000018 -19-25MAR11-1/1 Hydraulic System Pressure Release—Manual Controls CAUTION:

To avoid injury from escaping fluid under pressure, stop engine and relieve the pressure in the system before disconnecting or connecting hydraulic or other lines. Tighten all connections before applying pressure. TX1066128A —UN—05APR10 This procedure is to relieve trapped hydraulic system pressure before performing hydraulic system repairs or tests. 1. Sit in seat. Close cab door if equipped. 2. Lower interlocking seat bar. Boom Release Handle Access Cover 3. Turn key to run position. Do not start engine. 9— Access Cover 4. Switch park brake switch to middle position to engage hydraulic functions. 5. Raise and then lower interlocking seat bar. 6. Remove access cover (9).

Continued on next page KH31969,0000019 -19-22SEP11-1/2 2-2-21 071713 PN=73