John Deere 326D, 328D, 332D — Engine Oil and Filter Service Intervals—328D and 332D

Maintenance—Machine Diesel Engine Oil—328D and 332D Use oil viscosity based on the expected air temperature range during the period between oil changes. 50˚C 122˚F John Deere Plus-50™II oil is preferred. 40˚C 104˚F John Deere Plus-50 is also recommended. SAE 15W-40 SAE 10W-40 30˚C 86˚F Other oils may be used if they meet one or more of the following:

John Deere Torq-Gard™ API Service Category CJ-4 API Service Category CI-4 PLUS API Service Category CI-4 ACEA Oil Sequence E9 ACEA Oil Sequence E7 ACEA Oil Sequence E6 ACEA Oil Sequence E5 ACEA Oil Sequence E4 SAE 10W-30 20˚C 68˚F SAE 0W-40 SAE 5W-30 10˚C 50˚F 32˚F -10˚C 14˚F TX1050046 —UN—09AUG10 -20˚C -4˚F -30˚C -22˚F Multi-viscosity diesel engine oils are preferred. -40˚C -40˚F Diesel fuel quality and fuel sulfur content must comply with all existing emissions regulations for the area in which the engine operates. Oil Viscosities for Air Temperature Ranges DO NOT use diesel fuel with sulfur content greater than 10 000 mg/kg (10 000 ppm).

Plus-50 is a trademark of Deere & Company Torq-Gard is a trademark of Deere & Company MB60223,0000239 -19-16SEP11-1/1 3-1-9 071713 PN=89