. OPERATION EXPLANATION OF COMPONENTS the METHOD OF OPERATION 3 - 55 TEMPERATURE CONTROL SWI This swit ch (4) can be used to between l ow temperature and h igh temperatur The temp eratur e level indicator lamps (A) lig temperat ure of t he air coming fr om the vents. The more blue l amps on, the lo wer the temperature is to displa The color of th being pre ssed. When th switch to set the temperature. The settin gs for each mode are retained in memory even when the starting s witch is t urne d OFF. However, in the following cases , the settings must be reset.
When t he machine has been out of use for more than 7 days When t he battery voltage is e xtremely low When t here h as been abnor mal interferenc e from outside When t he fan switch is turne d OFF (the setting is not k ept in memory with only the air c onditioner witch is If the air c onditioner is used in th e FRESH position, t he inside of the cab will b e pressurized and this will preve nt the entry of d ust. er the position of the fan switch, the more effective the pressurizing becomes. The high er the position of the fa n switch, the m ore effective t he pressurizing becomes.
Switch Fan s Condition of use Air conditioner witch switch Temperature control switch FRESH/RECIRC selector switch Cooling Rapid H Normal HI - I ON All blue RECIRC LO ON More than half are blue FRESH Dehumidifying, HI - heating LO ON More than half are red FRESH Heating Rapid H Normal HI - I OFF All red RECIRC LO OFF More than half are red FRESH Defroster H I ON More than half are red FRESH Vetilation or HI - pressurizing LO OFF All blue FRESH