. OPERATION EXPLANATION OF COMPONENTS METHOD OF OPERATION Condition of use RECIRC/FRESH selector switch Switch Rapid heating RECIRC Ventilation or pressurization FRESH TO HEAT QUICKLY If the switch is operated as follows, the cab can be heated quickly. Set fan switch (1) to H1, humidity control switch (2) to All red, and RECIRC/FRESH selector switch (3) to RECIRC. Set blower switch (2) to position 3 (HIGH). NOTICE If the heating is run continuously for a long time using only recirculated internal air, the air in the cab will become dirty. After the cab warms up, always turn RECIRC/FRESH selector switch (3) to the FRESH position.
In this position, the inside of the cab is pressurized, and this prevents the entry of dust. NORMAL USE Set each switch to the desired position. CLEANING AIR FILTER If the RECIRC or FRESH air filters are clogged, the heating capacity will drop. Clean the air filter once a week with compressed air. For details of the method of cleaning, see "WHEN REQUIRED (PAGE 4-20)". 3 - 59 HEATER, HANDLING (Machine equipped with cab) (If equipped) Fan switch Humidity control switch HI All red HI - LO All blue