. OPERATION EXPLANATION OF COMPONENTS not mean that any cable can be used. Manufacture the cable as follows. 1) For the wiring, purchase three-core chloroprene sheath cab tire cable locally. 5 to 8 mm 2 . To prevent any drop in voltage, make the length less than 30 m (98 ft 5 in). 3 - 69 4. Manufacturing e xternal power source inp wer source input cable mu st be manufactured local ly to match the local conditions. This nal cross-sectional area o f one core should oltage resistance function , it should be able 3000 volts for 1 minute. chassis input side plug ( shipped as individual part) 175-06-37871 to th e tip of the cable. has three contacts and ea ch contact i s marked with a symbol.
Connect e ach of the 3 core le to its respective contac nnecting, solder each core wire to its t short-circuiting through t he conduc tor, insulate the soldered portion with a rubber tube or se part No. 175-06-37871 for the plu er plug is used, it will be i mpossible to connect to th e external power inp