. OPERATION OPERATION CHECK OIL LEVEL IN POWER TRAIN CASE, ADD OIL WARNING 3 - 82 The parts an d oil are at hi gh temperature after the engi ne is stopped, and may cause serious burns. Wa it for the temperature to go d own bef ore starting t 1. Remov e dipstick ( G), and wipe t he oil off with a cloth . e it. 2. Fully in sert dipstick (G) into filler pipe (F), the n remov 3. Check t hat the oil le vel is betwee n the top and bottom mark s on dipstick (G). il level is below the bottom mark, add oil through the holder. If the o dipstick 4.
If the oil is above th e top line, rem ove drain cov er (1) at the r ight side at t he bottom s urface of the power train c ase, loosen d rain plug (2) , drain the excess oil, th en check the oil level agai 5. If the oi l level is co rrect, tighten t he oil filter c REMARK If the m achine is at an angle, reposition it to level before g. I f checkin When ch ecking the oil level after t he engine ha s been o perated, allow th e engine to cool for 15 mi nutes before checkin g.