Komatsu — STARTING ENGINE

. OPERATION OPERATION OPERATION OPERATION pre-heating pilot lamp (3) on the monitor in the on position until the pre-heating pilot 6. When the engine starts, release the key in starting switch (2). The key will return automatically to the ON position. REMARK Immediately after starting the engine, run at idle. While running the engine, release the decelerator pedal and do not operate the work equipment. Guideline for idle time Cold weather: At least 15 seconds 1st start after changing engine oil or engine oil filter: 20 seconds 3 - 98 3. Check that e ngine panel lights u p. 4. Maintain the key lamp ( 3) goe 5.

When engine pre-heating pilo t lamp (3) goes off, turn the key of starting switch (2) to the ST ART position to crank the engine. t engine pre-heating pilot lamp (3) stays on changes according to the ambient temperature as table below. The ti me tha shown in the table below. Ambient temperature Pre-heat time -5°C to -10°C (23°F to 14°F) 20 to 27 seconds -10°C to -20°C (14°F to -4°F) 27 to 40 seconds -20°C to -30°C (-4°F to -22°F) 40 seconds