Komatsu — TIPS FOR LONGER UNDERCARRIAGE LIFE

. OPERATION OPERATION REMARK 3 - 128 INSPECTION AND Frequent inspection and prompt repair will reduce repair c The following items f or inspection will serve as a guide to m aintenance service of each undercarriage part. P periodical inspection n your limits and reversing MEASURING LINK P 1. Insert a wooden block between track sh oe and sprocket to take up the slack in t 2. Measure pitch l ength of 4 links in stret ched portion at least 2 links away for m pitch. aster pin. Of length obtained, 1/4 is the link h (P): 216.3 mm (8.5 in) t for turning bushing: 219.3 mm (8.6 in) window on the master link. Basic link pitc h (P): 216.3 mm (8.5 in Link pitch limi t for turning bushing:

2 19.3 mm (8.6 in There is no link window on the master l The measured value under decimal of link pi tch is different fr om the basic value depen ding upon the precisio n of measure or the . tolerance of product even if it isn't worn out Don't judge it's worn out too soon, do it with the trend of me asured value after that. MEASURING HEIGH After taking up sla ck in track shoes, mea sure height at c enter of shoe as shown b Standard height (h): Repair limits: 25 mm