. OPERATION TRANSPORTATION OPERATION TRANSPORTATION 4) Secure the attachment at two places with a chain or wire rope. 3 - 134 UNLOADING 1. Load and unlo ad on firm level ground on ly. Maintain a saf e distance from the edge of 2. Properly apply the brakes on the trailer and put bloc the tires to ens ure that the trailer does n ot move Make the slop e of the ramps a maximum of 15°. 3. Remove the ch ains and wire r opes faste ning the machine 4. Start the engin e. ne up fully. Warm the engi 5. Set main work equipment lock lever to F REE position (F), and raise the work (When transpo equipment. rting with work equipment installed) 6. Set parking br ake lever to the FREE pos ition (F) . 7.
Set the transm idle. ission in the 1st gear and run the engine at low 8. Set the travel d irection toward the ramps and drive slowly. 9. The center of gravity of the machine s hifts suddenl y at the border betwee n the ramps and trailer, and the machine is d becomes dangerous. Accordingly, pass the e ramps slowly and carefully until the machine ps perfectly. nd trailer, and th e ma chin e is unbalanced an pass the border slowly. 10. Drive down th leaves the ram