Komatsu — CLEAN INSIDE OF COOLING SYSTEM

. MAINTENANCE SERVICE PROCEDURE WHEN REQUIRED CLEAN INSIDE OF COOLING SYSTEM WARNING *1: When using Komatsu Supercoolant (AF-NAC), there is no need to use a corrosion resistor. When no corrosion resistor is used, use the special cover (600-411-9000). Please consult your Komatsu distributor about the method of installing. When using corrosion resister, use Komatsu genuine corrosion resister. If you use another corrosion resister, it may cause serious problems such as corrosion of the engine and parts of the cooling system that use light metals such as aluminum. The coolant has the important function of preventing corrosion as well as preventing freezing.

Even in the areas where freezing is not an issue, the use of antifreeze coolant is essential. Komatsu machines are supplied with Komatsu Supercoolant (AF-NAC). Komatsu Supercoolant (AF-NAC) has excellent anticorrosion, antifreeze and cooling properties and can be used continuously for 2 years or 4000 hours. As a basic rule, we do not recommend the use of any coolant other than Komatsu genuine supercoolant (AF-NAC). If you use another coolant, it may cause serious problems such as corrosion of the engine and parts of the cooling system that use light metals such as aluminum.

To maintain the anticorrosion properties of Supercoolant (AF-NAC), always keep the density of Supercoolant between 30% and 68%. 4 - 20 Immediately after the engine is stopped, the c ooling water is at high temperature a nd t he radiator is under high internal pressure . If the radiat or cap is re moved i n this condition an d the water is draine d, it may cause burn s. T o prevent t his, wait for the t emperature to go down, t hen turn the ca p slowly to r elease the internal p ressure. The cleaning operatio n is carried out with the en gine running .

When standing up from the operator's sea t or leaving the cab, set the p arking brake l ever and w ork equipment lock lever to the LOCK position. For detai ls when starti ng the engi ne, see " CHECK BEFOREST ARTING ENGINE,AD JUS T(PAGE 3-76)" a nd " STARTING ENGINE (PAGE 3 -95)" When th e engine is ru nning, neve r come c lose t o the fan at t he front of the machine. Ther e is danger of t ouching th e fan. When th e engine is ru nning, it is extremel y dangerous to go under the machine d urin g the cleaning o peration. The machine may mo ve unexpected ly, so neve r go und er the machine wh en the engine i s running.

Stop t he m achine on l evel groun d when cleaning or cha nging the Clean the inside of the cooling s ystem, chan ge the coola nt according to th e table b elow. In Antifreeze coolant terval for cleaning inside of cooling system and changing antifreeze coolant Precautions for use Komatsu supercoolant (AF-NAC) Every two years or every 4000 hours whichever comes first 1*