Komatsu — CLEAN STEERING CLUTCH CASE BREATHER

. MAINTENANCE SERVICE PROCEDURE If the strainer is dirty, clean it with diesel fuel. 4 - 36 CLEAN FUEL TANK S Clean the strainer if th ere is any dirt collecte d in i Remove the filler cap (1) of the fuel tank and tak e out DRAIN WATER AND SEDIMENT IN FUEL TAN K has been at rest for a . is drained. Carry out this proced ure after the machine has b een at rest fo long time and after a l ong spell of rainy days Prepare a containe r to catch the fuel that 1. Open drain valve( and water accum At this time, take 2. When clear fuel c 1) at the bottom of the t ulated on the bottom, t ank to drain ogether with care not pour fuel over yourself. 2. When clear fuel c omes out, close drain valve (1).

CLEAN STEERING CLUTCH CASE BREATHE 1. Open the valve co 2. Remove the bolts 3. Remove breather the dirt stuck to th 1. Open the valve co 2. Remove the bolts , then remove cover (1 3. Remove breather (2) at the side of the h ydraulic t ank , remove e breather, then wash it in clean diesel oil or