. OPERATION EXPLANATION OF COMPONENTS 3) When the buzzer cancel switch is operated to U , the contrast of the liquid crystal display panel B (multi-information) is set. switch to ‘ to rotate the cooling fan at the maximum speed. 3 - 33 3. Adjusting contrast of liqui d crystal display panel B (multi-information 1) The diagram on the right is the mode for adjusting the contrast of the liquid crystal display panel B (multi-information). On this screen, operate the buzzer cancel switch to U to switch to the screen to adjust the contrast. the 2) The contrast can be a djusted by operating the information switch. The higher the numb the lower the number > position:
Number in er, the deeper the screen becomes; , the lighter the screen becomes. creases 4. Mode to rotate cooling fa n at maximum speed The diagram on the right i s the mode for rotating the cooling fan at maximum speed. On t his screen, operate the buzzer cancel Note that this mode is ef diagramon the right is bei fective only when the display in ng given. After leaving this mode, the the screen returns to the nor mal mode. REMARK nce mode, operate the buzzer cancel switch to t. To return to the maintena nce mode, operate the buzzer cance l switc h to The brightness of the bac klighting of the monitor panel differs according t o whether the front la mp is lit o r not.
Entering this mode when t he front lamps are lit makes it possible t o a djust the brightness when t he front l amps are lit. In the same way, entering this mode when the front lamps are not lit makes it possible to adjust the lamps are not lit. possibl brightness when the front