. OPERATION EXPLANATION OF COMPONENTS OPERATION EXPLANATION OF COMPONENTS Gear shifting When the steering, directional, and gearshift lever is at the FORWARD or REVERSE position and switch (c) or switch (d) is pushed, the transmission speed will change. UP switch (c): Each time the switch is pressed, the transmission will shift up one speed. DOWN switch (d): Each time the switch is pressed, the transmission will shift down one speed. For details of the maximum speed in each speed range, see "SPECIFICATIONS (PAGE 5-2)". Operating counter-rotation turn WARNING the 3 - 40 REMARK d is displayed on panel A on the monitor panel according to the gearshift operation. he display panel.
ayed on the display panel. yed on the display panel. er is locked, P is displayed.\T The speed range being use d is displayed on panel A on the m onitor panel according to the g earshift operation Neutral: N is displayed on t FORWARD 2nd: F2 is displ REVERSE 3rd: R3 is displa When the parking brake lev For details of the method of shifting gears according to the s hift mode, see the "SHIFTING G EAR (PAGE 3 -107)". Shift mode selection me starting.
ans that the selected speed range is displayed at the NEUTRAL position (N) before (N) before When operating the counter-rot ation turn, if the load on the left and ri ght is not balanced, the machine m ay make a pivot turn, so check the ground conditions a nd be careful not to hit any obstacles when carrying out the operation. With the lever in the N po sition, move the lever partially in direction of turn. The left a nd right tracks will rotate in oppo directions, and the machine will make a slow counter-rotation t If the lever is moved further , the speed of the counter-rotation will increase. urn n (R): Right counter-rotation t (L): Left counter-rotation tur