. OPERATION OPERATION PRECAUTIONS WHEN OPERATION PRECAUTIONS WHEN TRAVELING UPHILL OR DOWNHILL WARNING WARNING the travel carry Gear speed Travel speed enabling downshifts (km/h, (MPH)) F2 -> F1 4.5 (2.8) F3 -> F2 6.5 (4.0) F4 -> F3 9.0 (5.6) F5 -> F4 13.0 (8.1) F6 -> F5 20.0 (12.4) F7 -> F6 29.0 (18.0) F8 -> F7 39.5 (24.5) TRAVELING DOWNHILL When traveling downhill, use the same speed range as when traveling uphill, and make full use of the braking force of the engine. If the machine travel speed is still too fast, use the foot brake.
REMARK If there is a risk of overrunning of the engine, the centralized warning lamp lights up and the short alarm sounds continuesly, and the gear is possibly shifted up to the next speed at the same time. These are not abnormal. As the travel speed slows down, the gear speed automatically returns to the speed set by the gear shift lever. IF ENGINE STOPS CAUTION 3 - 150 Never shift gear or plac e the t ransmission i n neutral whe n traveling on a s lope. It is dangerous to do t his, as the engine cannot be use d to brake the m achin e. Always plac e the transmission in t he appropriate speed range before starting t o travel dow n a hill . prevent overrun, always shift down 1 gear at time.
To prevent overrun, al ways s hift down 1 ge When goin g downhill, shift d own the trans mission to us e the engine brake. To prevent the the engine from overrunning, the rotation range enabling downshifts is Reduce depressing brake pedal and, ithi ange where downshifts downshift operation. speed by the If t he engine s tops, the br ake b ooste r will not work, so the operating effort of the pedal will become heavier and t he effec t of the brake will become l ower, even when the peda l is depressed with the same f orce.
If t he engine stop s on a slop e, immediate ly depress t he brake pedal fully to stop the machine, set the g earshif t lever to the P (Parking) position, t hen start the engine aga