. MAINTENANCE SERVICE PROCEDURE WARNING (2) off. injection nozzle radiator, oil cooler, when 4 - 35 CLEAN AND CHECK RADIATOR FINS, OIL COOLER FINS, AFTERCOOLER CONDENSER FINS If compressed air, pressuriz ed wate r, or steam h its your body dire ctly, or causes dirt to fly, it pos sibly leads to personal in Always wear safety glasses , dustproof mask an d other protective equipments. When using c ompressed ai r for cleaning, make sure the maximu m pressure of it is less than 0. 2 MPa (2.1 kg/cm2, 30.0 P D o not open t he engine sid e cover when the en gine is running. B efore starting to clean, compl NOTICE To prevent dama ge to the fins , apply compressed air from an appro priate distance.
Damaged fin s may cause water leaka overheating. In a dusty site, ch eck the fins daily, ir maintenance inte 1. Remove bo lts (1) on th e side s urface of th e hood to take p 2. Remove b olts (3) on th e side surface of t he radiator shro take panel (4) off. 3. Check that there is no mud or dirt cloggin g the radiator fin cooler fins, aftercooler fins, or condenser 4. Clean the inside by insertin g the ste through th after-coole e clearanc r (5), and air es among the -conditioner cond Steam or wate r can be us ed instead of co mpressed air.
B ut, make sure to keep a r easonable distance w performing wa shing with p owerful steam (hig h-pressure was hing) to heat exchange d evices (radiator, oil co afte r cooler, an d air conditio nercondenser). If steam washing ( high pressure washing) is performedfrom point-b distance, fins i nside the he at exchange devic e may deform w hich will cause clogging o r damage on early sta