. MAINTENANCE SERVICE PROCEDURE LUBRICATING WARNING 4 - 45 EVERY 250 HOURS SERVICE Maintenance for every 50 hours service should be carried out at the Set the gear shif t lever to the P (Parking) position and fix the front and rear f rames by using the articu Lower t he work equipmen t to the ground and stop the engine. Grease on flat gr 1. Using a grea se pump , pump in grease through the grease fittings 2. After greasin g, wipe off any old grease that was pushed out. Articulate pin (2 p Articulate cylinde r pin (4 places) Blade lift cylinder yoke (6 places