. MAINTENANCE SERVICE PROCEDURE CHECK DISC BRAKE WARNING METHOD OF CHECKING BRAKE DISC WEAR 1. Remove cap (1) from the wear indicator. 4 - 75 A small amount of oil will come o ut fro m the inspection plug hole, so do not look through the plug h ole when the brake is a pplied. PERIODICAL REPLACEMENT OF DISC BRAK Inspection: Every 1 2 months or 2 000 hours. Disassembly: If the disc brak e has reached t he wear limit or there is any problem in the brake system, judge if it is ssary to c arry o ut d isassembly or maintenance 2. Depres s the bra ke pedal and, l eaving the brake applied, t down u ntil the g auge (2) contacts piston (3). 3.
Turn guide (4) u below-groove li ntil top s ne (B) of urface gauge (A (2) 4. Tighten nut (5) to fix guid e (4). 5. Install cap (1).