1.2. Foreword Introduction In addition to the operating instructions, you must also adhere to all legal regulations on public traffic and all applicable regulations on prevention of accidents. Notes on later installation of electrical and electronical devices and components Electrical or electronical devices and/or components installed later emit electromagnetic radiation which may influence the proper function of electronic components and parts of the machine. This may impair safety of the machine and endanger persons. For this reason, strictly adhere to the following safety notes.
If you later install electrical and electronical devices and/or com- ponents in the machine and connect them to the vehicle electrical system, you are responsible for any malfunctions of the vehicle electronics or other components resulting from this installation. Above all, check that all electrical and electronical components which you install later comply with the valid version of the EMC directive 89/336/EEC and that they are labelled with the CE mark. The following requirements must additionally be met for a later installation of mobile communication systems. Only install devices which have a licence referring to valid national regulations. The device must be stationary.
Only use portable or mobile devices in the cab, if they are connected to a stationary external aerial. Install the sender in such a way that it is physically separated from the vehicle electronics. When installing the aerial, make sure that it is installed cor- rectly with a good chassis earth connection between the aerial and the chassis of the vehicle. In addition, adhere to all information about installation and con- nection of cables and maximum power input indicated in the man- ufacturer’s installation instructions of the machine. 1-6 WA100M-5 – VEAM280201