Komatsu — COLD WEATHER OPERATION

COLD WEATHER OPERATION PREPARATION FOR LOW TEMPERATURE If the temperature becomes low, it becomes difficult to start the engine, and the coolant may freeze, so do as follows. FUEL AND LUBRICANTS Change to fuel and oil with low viscosity for all components. For details of the specified viscosity, see the TABLE OF FUEL, COOLANT AND LUBRICANTS. COOLANT After cleaning inside of the cooling system, add antifreeze to the coolant to prevent the coolant from freezing when the machine is not being used. * For details of the antifreeze mixture when changing the coolant, see WHEN REQUIRED.

Care in using Antifreeze Use a Permanent Antifreeze (ethylene glycol mixed with corrosion inhibi- tor, antifoam agent, etc.) meeting the standard requirements as shown below. With permanent antifreeze, no change of coolant is required for a year. If it is doubtful that an available antifreeze meets the standard require- ments, ask the supplier of that antifreeze for information. Standard requirements for permanent antifreeze SAE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . J1034 FEDERAL STANDARD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

O-A-54BD Never use methanol, ethanol or propanol based antifreeze. Where no permanent antifreeze is available, an ethylene glycol antifreeze without corrosion inhibitor may be used only for the cold season. In this case, clean the cooling system twice a year (in spring and autumn). When refilling the cooling system, add antifreeze in autumn, but do not add any in spring. t Absolutely avoid using any water leak preventing agent irrespective of whether it is used independently or mixed with an antifreeze. t Do not mix one antifreeze with a different brand. A Antifreeze is flammable, so keep it away from any flame. 0 0 * * - 98 -