PERIODICAL REPLACEMENT OF SAFETY PARTS user of the machine must always carry out periodic maintenance. In addi- To ensure safety at all times when operating or driving the machine, the tion, to furher improve safety, the user should also carry out periodic re- placement of the parts given in the table on the next page. These parts are particularly closely connected to safety and fire prevention. With these parts, the material changes as time passed, or they easily wear or deteriorate. However, it is difficult to judge the condition of the parts fixed time has passed, regardless of their condition.
This is necessary to en- simply by periodic maintenance, so they should always be replaced after a sure that they always maintain their function compeletly. However, if these parts show any abnormality before the replacement in- terval has passed, they should be repaired or replaced immediately. If the hose clamps show any deterioration, such as deformation or cracking, replace the clamps at the same as the hoses. periodic replacement parts listed on the next page. If any abnormality is Carry out the following inspection for hydraulic hoses in addition to the found, tighten, replace, or take any other necessary action.
Category of inspection Inspection item Check before starting Leakage from joints or caulked portion of fuel or hydraulic hoses Periodic inspection (monthly inspection) Leakage from joints or caulked portion of fuel or hydraulic hoses Damage (cracks, wear and tear) of fuel or hydraulic hoses Periodic inspection (yearly inspection) Leakage from joints or caulked portion of fuel or hydraulic hoses Interference, deterioration, twisting, damage (cracks, wear and tear, crushed parts) of fuel or hydraulic hoses -112-