Komatsu — ADJUSTMENT

ADJUSTMENT ADJUSTMENT OF BUCKET CLEARANCE If there is excessive free play on the coupling section of the bucket and arm, adjust the bucket clearance in the following manner. When adjusting, set the work equipment in the posture shown in the dia- gram. Loosen 4 bolts (2), bolt (3) and plate (1). Take out shims (4) equivalent in size to free play “a”. The thickness of shim (4) is 0.5 mm or 1 mm each. When free play “a” is less than 0.5 mm, do not compress the shims by tightening bolt (2). Tighten 4 bolts (2) and bolt (3). Then, clearance “b” becomes larger and free play “a” is removed. (5): Bucket (6): Bush (7): Arm -164-