Komatsu — TROUBLE SHOOTING GUIDE

When abnormal Display Condition of machine .i-L ( 1 7 \-\ .15 .I Abnormality in electrical system Only power source monitor lights up Abnormality in electrical system All lamps OFF Abnormality in electrical system * If any abnormality occurs, lower the work equipment to the ground, check the display on the controller, then contact your Komatsu distributor for repairs. * If it is thought that there is any abnormality or cause not listed above, please contact your Komatsu distributor for repairs. t If there is more than one failure, the abnormality display shows each abnormality in turn, so check all of the abnoramlity codes.

* When any abnormality occurs, always check the abnormality display of the controller before turning the starting switch to the OFF position. - 172 -