8. CONNECTING HYDRAULIC CIRCUIT When connecting the attachment, connect the hydraulic circuit as fol- lows. 1. Remove blind plug (1) at the tip of the stop valve piping. (Left and right, 2 places) * Be careful not to lose or damage the removed parts. 2. Connect attachment piping (2) provided by the attachment maker to the part from the which the plug was removed. * When it is shipped from the plant, tube (3) is fitted with an Okada com- patible part. In other cases, a Nippon Pneumatic compatible part is also used, but when adding an accumulator, the action to take differs accord- ing to the attachment maker, so please contact your Komatsu distributor. - 190-