PERIODIC MAINTENANCE EVERY 250 HOURS SERVICE When the attachment has been used for 250 hours, replace the addi- tional filter element as follows. REPLACE ELEMENT OF ADDITIONAL FILTER IN RETURN CIRCUIT Remove the cap from oil filler port (F). Loosen drain plug (P) of additional filter (I), and drain the oil from inside the filter case. Remove the filter case, and take out the element. Clean the removed parts, then install a new element. By installing an additional filter, the element of the hydraulic filter can be changed at the normal time (250 hours) (see EVERY 250 HOURS SERVICE in the operation and maintenance manual for the standard machine). a. 1. 2. 3. 4. * - 198-