Komatsu — PC200, 200LC-5 MIGHTY (METHOD FOR HANDLING THE ATTACHMENTS)

WHEN REQUIRED a. CLEAN INSIDE OF COOLING SYSTEM The proportion of water and antifreeze is determined according to the table below. Mixing rate of water and antifreeze Min. atmospheric temperature (“Q -5 -10 -15 -20 -25 -30 Amount of antifreeze 3.7 4.9 5.6 6.7 7.5 8.1 (2) Amount of water W 12.4 11.2 10.3 9.4 8.6 8.0 * The specified amount of cooling water in the cooling system is 16.1 II. For details of the method of cleaning, see the operation and Maintenance Manual for the standard machine, WHEN REQUIRED. b.

CHANGE OIL IN HYDRAULIC TANK When a hydraulic breaker is installed, the hydraulic oil deteriorates much faster than when carrying out normal bucket digging operations, so change the oil as shown in the diagram on the right. (a): Hydraulic oil change interval curve (b): Change interval (Hours) (c): Breaker operation rate (%) (d): (When not using breaker) (e): (Using only breaker) For details of the method of changing, see the Operation and Mainten- ance Manual for the standard machine, EVERY 2000 HOURS SERVICE. - 200 -