Komatsu — SAFETY HINTS

SAFETY HINTS l l l A OPERATION i GENERAL 1. Wear well-fitting helmet, safety shoes and working clothes. If the nature of the work requires safety, wear protective goggles or mask, thick gloves, ear plugs or other protection. Accidents or injuries are liable to occur when the operator is careless or slack. It is most important to bear safe operation in mind at all times. Take care of your health. Do not operate when tired, or after drinking. Learn the prohibitions, cautions and rules about work procedures in the work site. When there is a leader, fix standard signals and always follow these sig- nals when operating.

If there should be an accident or fire or any other such unexpected mis- hap, deal with it quickly, using the nearest apparatus. Learn beforehand the locations of the first aid boxes and fire extinguish- ers and how to use them. It is also important to know the emergency contact system. Learn about the safety devices on your own machine and about how to use them. Confirm that they are correctly attached in the prescribed position. Such safety devices include: * Protective-Devices * Seat Belts Exhaust gas is dangerous. When running the engine for long periods in a poorly ventilated area, there is a danger of gas poisoning, so open the windows or doors to ensure a good supply of fresh air.

Read the Operation and Maintenance Manual carefully. Learn how to use the control devices, gauges and warning devices. Be sure you under- stand the meaning of the caution plates. Remember the check points and checking method for engine oil, fuel, cooling water and hydraulic oil levels. When operating inside a building always be sure of the clearance of the ceiling, entrances, aisles, etc. and the load limit of the floor. Never allow other person than the operator to ride on the machine dur- ing operation. 2. 3. 4. 5. 6. 7. 8. 9. 10. -2-