Komatsu — RADIO

How to set station selector buttons Set the station selector buttons to the desired stations as shown in the following figure. 1. Pull back the button corresponding to the station to be preselected. 2. Turn the station selector knob until the pointer is in front of the desired station. (Carefully tune in so that noise disappears and the broadcast is heard plainly.) 3. Carefully push back the button with the fingertip until it clicks into place. * When setting the turning selector to a strong station, shorten the antenna to reduce the input as far as possible before carrying out alignment.

Precautions when using radio 0 To prevent possible breakdown, keep water well away from the speaker case and interior of the radio. In particular, close the window during rain or when washing the machine. 0 Do not wipe the dial plate or knobs with benzine or paint thinners, etc. Always use a dry, soft cloth (if the radio is particularly dirty, soak the cloth in alcohol). 0 Do not disassemble the radio. Trouble shooting guide No sound 0 Turn the SWNOL knob to the right and press it two or three times. Sound quality is poor. Reception is noisy. 0 Return using the station selector knob. If the problem disappears, reset the tuning button. 0 Try lengthening the antenna to its fullest extent.

- 20 -