OPERATING THE CAR COOLER CONTROL PANEL 0 Air flow control knob Turn from LO to MED or HI to increase the air flow. 0 Temperature control knob Turn the knob clockwise to give a lower room temperature. For efficient use If the inside of the operator’s cab is hot after the machine has been parked for a long time in the sun, open the windows and doors fully to cool the operator’s cab before switching on the cooler. When using the cooler, make sure that the windows and doors are prop- erly shut. If there is dirt or mud on the condenser, the cooler will not cool properly. When washing or checking the machine, always remove all dirt and mud from the condenser, to ensure a good flow of air.
For reasons of health, the temperature inside the cab should not be adjusted too low. As a general rule, the temperature should be kept at a maximum of 5 to 6°C below the outside temperature, enough to feel cool when entering the cab. - 24 -